|
|
ZW3D Base
|
Home > ZW3D Sketcher > ZW3D Sketch Level
> Introduction - The Sketch Level
|
|
Introduction - The Sketch Level
|
The Sketch Level of ZW3D contains functions that relate to creating a sketch (part and root sketches). The Sketch Level is activated in the following ways.
- When a sketch is created or edited by commands at the
Part Level.
- When a sketch is selected with a double-left-click (object editor) at the
Part Level.
- When a root sketch is created or edited at the
Object Level.
At the Sketch Level, the
Basic Tooltab, Pull Down Menus, and the Toolbar are all displayed.
Here's What you can Do
Here are some of the things you can do at the Sketch Level:
- Create/edit sketch geometry that will drive part features.
- Add dimensions, constraints and equations to geometry.
- Add sketch attributes.
- Inquire and analyze the constraint system.
- Inquire curve connections.
- Solve (evaluate) the sketch
-
Return to the Part Level (or
Object Level in the case of a root sketch) when the Exit icon
is selected from the Toolbar.
|
|
Copyright © ZWCAD Software Co.,Ltd |
|